RallyX
⭐️⭐️⭐️1/10 Scale Scottish Rally Championship Rules
⭐️⭐️⭐️
Please NOTE: For club meetings any gyro's should be disabled or removed. This is easily done and assistance how to do this is available from the club.
It is the responsibility of all competitors to ensure that their car complies with all 1/10 scale Scottish Rally Championship rules at all times during the event and at each rally stage.
CLASSIFICATIONS
CLASS 1 - STOCK COMPETITIVE
- Any commercially available 1/10th 2 or 4 wheel drive chassis in stock form / as kit supplied
- The fitting of ball bearings is permitted if the kit did not originally include them
- No other modifications or hop-ups are permitted from the original kit design except alloy replacement parts
- Kit supplied electronics must be used. Open ESC/Servo usage if the kit was not supplied with electronics
- Lexan 1/10 Scale Rally Car Shell Must be included in original kit ( Body shell can be swapped for after market preference
- LED Lights if not standard can be added
- Tamiya or similar Lexan cockpit optional
CLASS 2 - MODIFIED COMPETITIVE
- Any commercially available 1/10th 2 or 4 wheel drive chassis
- In addition to Class 1 Regulations, modifications permitted are the fitting of adjustable shock absorbers, tuned springs, anti roll bars, modified/upgraded centre prop shaft on 4 wheel drive shaft-driven models
- Any ESC/Servo can be used
- Modifications permitted are the fitting of alloy/carbon fibre modified / upgraded parts.
- Lexan 1/10 Scale Rally Car Shell stock as supplied in kit or aftermarket preference
- LED Lights if not standard can be added
- Tamiya or similar Lexan cockpit optional
CLASS 3 - OPEN NON COMPETITIVE
- Any commercially available 2 or 4 wheel drive chassis 1/18 - 1/8 scale
- Modifications permitted are the fitting of alloy/carbon fibre modified / upgraded parts.
- Lexan Rally Car Shell as supplied in kit or after market preference .
TECHNICAL RULES
Construction and Appearance:
- Cars entered for Rally competition will be reasonable representations of full size cars, generally accepted as being suitable for Rallycross or Rallying
- Any commercially available RALLY 1/10th scale body shell may be used for class 1 and class 2
- Any commercially available RALLY 1/18th - 1/8th scale body shell may be used for class 3
- Cars must be raced with a body shell securely fitted at all times, including practice and testing. No running without shell including practice and testing
- Windows are not allowed to be removed or include holes, other than for the purpose of the antenna.
Wheels and Tyres:
- Plastic or Metal commercially available wheels and rally block tyres may be used.
- No sponge/foam tyres are allowed. Internal foam inserts are permitted.
- No additives other than water will be allowed on any tyre
Motors:
Class 1 Stock –
- Any commercially available 27 Turn silver can Brushed motor or Tamiya Torque tuned (25 Turn)
Class 2 Modified–
- Any commercially available Brushed motor.
- Any commercially available Brushless Motor
- Motor tuning / timing is permitted.
Class 3 Open Modified -
- Any commercially available 17.5 Turn (or greater) or Brushless Motor
- Motor tuning / timing is permitted.
Batteries:
- LiPo/LiFe batteries must be charged in a ‘Closed Lipo sack’ at all times.
Class 1 -
- Cars will be driven by cells/batteries with a nominal voltage not exceeding 7.6v. The maximum charge voltage is 8.40v
- Cells/batteries cannot be replaced after a race has started.
- 2s Hard Cased LiPo/LiFe batteries are preferred.
Class 2 and 3 -
- Cars will be driven by cells/batteries with a nominal voltage not exceeding 11.1v.
- Cells/batteries cannot be replaced after a race has started.
- 2s (class 2) or 3s (class 3) Hard Cased LiPo/LiFe batteries are preferred.
THE COMPETITION
- The Gathering ‘Knockhill’ 16/3/25, Meet and greet , fun rally
Six rounds will be held across the year
- SPRING ‘KNOCKHILL’ LAUNCH 20/4/25
- SUMMER TBA
- AUTUMN TBA
- WINTER TBA
- SPECIAL STAGES TBA
- NIGHT RALLY TBA
ENTRY FEE (to cover prizes and trophies) and new MEMBERSHIP of RC SCALE SCOTLAND CLUB or current DDRCC membership (includes public liability insurance) will be required by all participants, payable in advance.
Events will be run by DDRCC in association with The RC Scale Scotland Club
Sent from my Galaxy